One of the best tools that you have as gardeners to help us estimate your gardening schedule is the USDA zone info. The most important data that the zone info tells us is average last frost and the lowest expected temperature for your area.

One way of estimating when to plant anagallis is to look at the USDA zone info for Carpinteria.

Planting Calendar for Anagallis

Frost tolerance for anagallis:	Tolerant of a very small amount of frost.
When to plant:	Up to 3 weeks before last frost.

Since anagallis are barely cold tolerant you can plant them a bit earlier in the year than plants that are more sensitive to the cold.

The earliest that you can plant anagallis in Carpinteria is February. However, you really should wait until March if you don't want to take any chances.

The last month that you can plant anagallis and expect a good harvest is probably September. If you wait any later than that and your anagallis may not have a chance to fully mature. If you are starting your anagallis indoors then you might be able to get away with starting them a little bit earlier.

Last Frost Date

On average the last frost has passed is on January 31 in Carpinteria. It might get as low as 30°F during the coldest months of winter.

Always keep in mind that the actual date of last frost is just an average because it is based on the USDA zone info for Carpinteria and it can change quite a bit from year to year. Since half of the time in Carpinteria last frost occurs after January 31 be ready to protect your anagallis if you have a surprise late frost.

USDA Zone Info for Carpinteria

Here is the info for USDA Zone 10a.

Average Date of Last Frost (spring)	January 31
Average Date of First Frost (fall)	December 15
Lowest Expected Low	30°F
Highest Expected Low	35°F

This means that on a really cold year, the coldest it will get is 30°F. On most years you should be prepared to experience lows near 35°F.

Plants to Grow in Carpinteria

You may be interested in your other planting guides for Carpinteria.