One of the best tools that you have as gardeners to help us figure out your gardening schedule is the USDA zone info. The zone info helps tell us things like average date of last frost and lowest expected temperature for your area.

In Ceres you can figure out when you can plant polygonums by looking at the USDA zone info.

Planting Calendar for Polygonums

Frost tolerance for polygonums:	Not tolerant of frost.
When to plant:	After the last frost has passed.

Polygonums are not cold tolerant which tells us that you need to wait until it warms up after the last frost when the weather gets warmer before you can plant them.

The earliest that you can plant polygonums in Ceres is March. However, you really should wait until April if you don't want to take any chances.

The last month that you can plant polygonums and expect a good harvest is probably September. If you wait any later than that and your polygonums may not have a chance to fully mature. If you are starting your polygonums indoors then you might be able to get away with starting them a little bit earlier.

Last Frost Date

On average the last frost has passed is on February 15 in Ceres. It might get as low as 25°F during the coldest months of winter.

Just be sure to remember that USDA zone info for Ceres may not be accurate from year to year and the actual date of last frost is different every year. Half of the time in Ceres it frosts late in the year after February 15 so just be sure to be ready to protect your polygonums if you have one of those late frosts.

USDA Zone Info for Ceres

Here is the info for USDA Zone 9b.

Average Date of Last Frost (spring)	February 15
Average Date of First Frost (fall)	December 15
Lowest Expected Low	25°F
Highest Expected Low	30°F

This means that on a really cold year, the coldest it will get is 25°F. On most years you should be prepared to experience lows near 30°F.

Plants to Grow in Ceres

You may be interested in your other planting guides for Ceres.