One of the best tools that you have as gardeners to help us figure out your gardening schedule is the USDA zone info. The zone info helps tell us things like average date of last frost and lowest expected temperature for your area.

By checking out the USDA zone info for Corning you should be able to estimate when you can plant platycodon.

Planting Calendar for Platycodon

Frost tolerance for platycodon:	Tolerant of a very small amount of frost.
When to plant:	Up to 3 weeks before last frost.

Platycodon do ok in a tiny bit of cold which means that you can plant them just a tiny bit earlier in the year than other plants that might not handle the cold.

The earliest that you can plant platycodon in Corning is February. However, you really should wait until March if you don't want to take any chances.

The last month that you can plant platycodon and expect a good harvest is probably September. You probably don't want to wait any later than that or else your platycodon may not have a chance to grow to maturity. You can get started a few weeks earlier by starting your platycodon indoors.

Last Frost Date

The average date of last frost is February 15 in Corning. You should expect an average low temperature of 20°F in the coldest months of winter.

Keep in mind that the actual date of last frost may not be accurate from year to year because it is based on the USDA zone info for Corning and it can change quite a bit from year to year. Half of the time in Corning there is a last frost after February 15 so make sure that you are ready to cover your platycodon in the event of a late frost.

USDA Zone Info for Corning

Here is the info for USDA Zone 9a.

Average Date of Last Frost (spring)	February 15
Average Date of First Frost (fall)	December 15
Lowest Expected Low	20°F
Highest Expected Low	25°F

This means that on a really cold year, the coldest it will get is 20°F. On most years you should be prepared to experience lows near 25°F.

Plants to Grow in Corning

You may be interested in your other planting guides for Corning.