One of the first steps you take when you are figuring out your gardening schedule is find your USDA Zone info. The most important data that the zone info tells us is average last frost and the lowest expected temperature for your area.

The first chance to plant platycodon in Danville should be determined by checking out the USDA zone info.

Planting Calendar for Platycodon

Frost tolerance for platycodon:	Tolerant of a very small amount of frost.
When to plant:	Up to 3 weeks before last frost.

Since platycodon are one of those plants that can tolerate a tiny bit of cold weather you can plant them slightly earlier in the year than plants that are more sensitive to the cold.

The earliest that you can plant platycodon in Danville is February. However, you really should wait until March if you don't want to take any chances.

The last month that you can plant platycodon and expect a good harvest is probably September. Any later than that and your platycodon may not have a chance to fully mature. If you are starting your platycodon indoors then you might be able to get away with starting them a little bit earlier.

Last Frost Date

The average date of last frost is February 15 in Danville. It might get as low as 25°F during the coldest months of winter.

Always keep in mind that USDA zone info for Danville is an average and the actual date of last frost can change quite a bit from year to year. Half of the time in Danville last frost occurs after February 15 so make sure that you are ready to cover your platycodon if you have a late frost.

USDA Zone Info for Danville

Here is the info for USDA Zone 9b.

Average Date of Last Frost (spring)	February 15
Average Date of First Frost (fall)	December 15
Lowest Expected Low	25°F
Highest Expected Low	30°F

This means that on a really cold year, the coldest it will get is 25°F. On most years you should be prepared to experience lows near 30°F.

Plants to Grow in Danville

You may be interested in your other planting guides for Danville.