One of the best tools that you have as gardeners to help us figure out your gardening schedule is the USDA zone info. The most important data that the zone info tells us is average last frost and the lowest expected temperature for your area.

It's possible to estimate when to plant platycodon by checking out the USDA zone info for Gilroy.

Planting Calendar for Platycodon

Frost tolerance for platycodon:	Tolerant of a very small amount of frost.
When to plant:	Up to 3 weeks before last frost.

Since platycodon do ok in moderate cold you can plant them just a tiny bit earlier in the year than plants that are more sensitive to the cold.

The earliest that you can plant platycodon in Gilroy is February. However, you really should wait until March if you don't want to take any chances.

The last month that you can plant platycodon and expect a good harvest is probably September. You probably don't want to wait any later than that or else your platycodon may not have a chance to grow to maturity. If you are starting your platycodon indoors then you might be able to get away with starting them a couple of weeks earlier.

Last Frost Date

The average date of last frost is February 15 in Gilroy. It might get as low as 25°F during the coldest months of winter.

Just be sure to remember that the actual date of last frost may not be accurate from year to year because it is based on the USDA zone info for Gilroy and it will vary from year to year. Since half of the time in Gilroy you get surprised by a frost after February 15 be ready to cover your platycodon in the event of one of those late frosts.

USDA Zone Info for Gilroy

Here is the info for USDA Zone 9b.

Average Date of Last Frost (spring)	February 15
Average Date of First Frost (fall)	December 15
Lowest Expected Low	25°F
Highest Expected Low	30°F

This means that on a really cold year, the coldest it will get is 25°F. On most years you should be prepared to experience lows near 30°F.

Plants to Grow in Gilroy

You may be interested in your other planting guides for Gilroy.