One of the first steps you take when you are estimating your gardening schedule is find your USDA Zone info. The zone info helps tell us things like average date of last frost and lowest expected temperature for your area.

It's possible to determine when to plant creeping zinnia by referring to the USDA zone info for Lindsay.

Planting Calendar for Creeping Zinnia

Frost tolerance for creeping zinnia:	Tolerant of a very small amount of frost.
When to plant:	Up to 3 weeks before last frost.

Since creeping zinnia are one of those plants that can tolerate a tiny bit of cold weather you can plant them slightly earlier in the year than other frost tender plants.

The earliest that you can plant creeping zinnia in Lindsay is February. However, you really should wait until March if you don't want to take any chances.

The last month that you can plant creeping zinnia and expect a good harvest is probably September. If you wait any later than that and your creeping zinnia may not have a chance to grow to maturity. If you are starting your creeping zinnia indoors then you might be able to get away with starting them a little bit earlier.

Last Frost Date

On average all chance of frost has passed is on February 15 in Lindsay. It might get as low as 20°F during the coldest months of winter.

Always keep in mind that the actual date of last frost is an average because it is based on the USDA zone info for Lindsay and it is different every year. Half of the time in Lindsay it frosts late in the year after February 15 so always be ready to cover your creeping zinnia if you have a late frost.

USDA Zone Info for Lindsay

Here is the info for USDA Zone 9a.

Average Date of Last Frost (spring)	February 15
Average Date of First Frost (fall)	December 15
Lowest Expected Low	20°F
Highest Expected Low	25°F

This means that on a really cold year, the coldest it will get is 20°F. On most years you should be prepared to experience lows near 25°F.

Plants to Grow in Lindsay

You may be interested in your other planting guides for Lindsay.