One of the first steps you take when you are making a decision about your gardening schedule is find your USDA Zone info. The zone info helps tell us things like average date of last frost and lowest expected temperature for your area.

By looking at the USDA zone info for Pacifica it's a good idea to figure out when it's a good idea to plant artemesia.

Planting Calendar for Artemesia

Frost tolerance for artemesia:	Tolerant of a very small amount of frost.
When to plant:	Up to 3 weeks before last frost.

You can plant artemesia slightly earlier in the year because they do ok in moderate cold.

The earliest that you can plant artemesia in Pacifica is February. However, you really should wait until March if you don't want to take any chances.

The last month that you can plant artemesia and expect a good harvest is probably September. You probably don't want to wait any later than that or else your artemesia may not have a chance to fully mature. If you are starting your artemesia indoors then you might be able to get away with starting them a little bit earlier.

Last Frost Date

In Pacifica the average date of last frost happens on January 31. It might get as low as 30°F during the coldest months of winter.

Since the USDA zone info for Pacifica is just an average the actual date of last frost changes from year to year. Half of the time in Pacifica you get surprised by a frost after January 31 so always be ready to protect your artemesia if you have a surprise late frost.

USDA Zone Info for Pacifica

Here is the info for USDA Zone 10a.

Average Date of Last Frost (spring)	January 31
Average Date of First Frost (fall)	December 15
Lowest Expected Low	30°F
Highest Expected Low	35°F

This means that on a really cold year, the coldest it will get is 30°F. On most years you should be prepared to experience lows near 35°F.

Plants to Grow in Pacifica

You may be interested in your other planting guides for Pacifica.