One of the first steps you take when you are getting a good idea your gardening schedule is find your USDA Zone info. The zone info helps tell us things like average date of last frost and lowest expected temperature for your area.

The best time to plant platycodon in San Dimas should be figured out by reviewing the USDA zone info.

Planting Calendar for Platycodon

Frost tolerance for platycodon:	Tolerant of a very small amount of frost.
When to plant:	Up to 3 weeks before last frost.

Platycodon are barely cold tolerant which tells us that you can get them planted just a bit earlier than other frost tender plants.

The earliest that you can plant platycodon in San Dimas is February. However, you really should wait until March if you don't want to take any chances.

The last month that you can plant platycodon and expect a good harvest is probably September. If you wait any later than that and your platycodon may not have a chance to fully mature. If you are starting your platycodon indoors then you might be able to get away with starting them a couple of weeks earlier.

Last Frost Date

The average date of last frost is January 31 in San Dimas. In the coldest months of winter you should expect an average low temperature of 30°F.

Since the USDA zone info for San Dimas may not be accurate from year to year the actual date of last frost is different every year. Half of the time in San Dimas you get a frost after January 31 so make sure that you are prepared to cover your platycodon if you have a surprise late frost.

USDA Zone Info for San Dimas

Here is the info for USDA Zone 10a.

Average Date of Last Frost (spring)	January 31
Average Date of First Frost (fall)	December 15
Lowest Expected Low	30°F
Highest Expected Low	35°F

This means that on a really cold year, the coldest it will get is 30°F. On most years you should be prepared to experience lows near 35°F.

Plants to Grow in San Dimas

You may be interested in your other planting guides for San Dimas.