The USDA Zone info is a great tool for gardeners to help us determine your gardening schedule. The most important data that the zone info tells us is average last frost and the lowest expected temperature for your area.

A way of figuring out when it's a good idea to plant brachycome is to look at the USDA zone info for Santa Fe Springs.

Planting Calendar for Brachycome

Frost tolerance for brachycome:	Not tolerant of frost.
When to plant:	After the last frost has passed.

It's probably a bad idea to plant brachycome until after the last frost when the weather gets warmer because they require warm weather.

The earliest that you can plant brachycome in Santa Fe Springs is February. However, you really should wait until March if you don't want to take any chances.

The last month that you can plant brachycome and expect a good harvest is probably September. You probably don't want to wait any later than that or else your brachycome may not have a chance to fully mature. If you are starting your brachycome indoors then you might be able to get away with starting them a few weeks earlier.

Last Frost Date

On average the last frost has passed is on January 31 in Santa Fe Springs. It might get as low as 35°F during the coldest months of winter.

Since the USDA zone info for Santa Fe Springs is just an average the actual date of last frost can change quite a bit from year to year. Since half of the time in Santa Fe Springs you get surprised by a frost after January 31 be ready to protect your brachycome in the event of a surprise late frost.

USDA Zone Info for Santa Fe Springs

Here is the info for USDA Zone 10b.

Average Date of Last Frost (spring)	January 31
Average Date of First Frost (fall)	December 15
Lowest Expected Low	35°F
Highest Expected Low	40°F

This means that on a really cold year, the coldest it will get is 35°F. On most years you should be prepared to experience lows near 40°F.

Plants to Grow in Santa Fe Springs

You may be interested in your other planting guides for Santa Fe Springs.