One of the first steps you take when you are making a decision about your gardening schedule is find your USDA Zone info. The zone info helps tell us things like average date of last frost and lowest expected temperature for your area.

The USDA zone info for Santa Paula should be reviewed to determine when to plant platycodon.

Planting Calendar for Platycodon

Frost tolerance for platycodon:	Tolerant of a very small amount of frost.
When to plant:	Up to 3 weeks before last frost.

You can plant platycodon just a tiny bit earlier in the year because they do ok in moderate cold.

The earliest that you can plant platycodon in Santa Paula is February. However, you really should wait until March if you don't want to take any chances.

The last month that you can plant platycodon and expect a good harvest is probably September. You probably don't want to wait any later than that or else your platycodon may not have a chance to fully mature. If you are starting your platycodon indoors then you might be able to get away with starting them a few weeks earlier.

Last Frost Date

In Santa Paula the average date of last frost happens on February 15. It might get as low as 25°F during the coldest months of winter.

Since the USDA zone info for Santa Paula is not always accurate the actual date of last frost is different every year. Since half of the time in Santa Paula you get surprised by a frost after February 15 be ready to cover your platycodon in the event of a late frost.

USDA Zone Info for Santa Paula

Here is the info for USDA Zone 9b.

Average Date of Last Frost (spring)	February 15
Average Date of First Frost (fall)	December 15
Lowest Expected Low	25°F
Highest Expected Low	30°F

This means that on a really cold year, the coldest it will get is 25°F. On most years you should be prepared to experience lows near 30°F.

Plants to Grow in Santa Paula

You may be interested in your other planting guides for Santa Paula.