Before planting it is a good idea to find your USDA Zone info to estimate your garden schedule. The most important data that the zone info tells us is average last frost and the lowest expected temperature for your area.

One way of figuring out when it's possible to plant anagallis is to look at the USDA zone info for Wasco.

Planting Calendar for Anagallis

Frost tolerance for anagallis:	Tolerant of a very small amount of frost.
When to plant:	Up to 3 weeks before last frost.

You can plant anagallis just a tiny bit earlier in the year because they do ok in moderate cold.

The earliest that you can plant anagallis in Wasco is February. However, you really should wait until March if you don't want to take any chances.

The last month that you can plant anagallis and expect a good harvest is probably September. If you wait any later than that and your anagallis may not have a chance to grow to maturity. You can get started a little bit earlier by starting your anagallis indoors.

Last Frost Date

On average the last frost has passed is on February 15 in Wasco. In the coldest months of winter you can expect an average low temperature of 20°F.

Always keep in mind that the actual date of last frost is not always accurate because it is based on the USDA zone info for Wasco and it is different every year. Half of the time in Wasco last frost occurs after February 15 so make sure that you are ready to cover your anagallis if you have a surprise late frost.

USDA Zone Info for Wasco

Here is the info for USDA Zone 9a.

Average Date of Last Frost (spring)	February 15
Average Date of First Frost (fall)	December 15
Lowest Expected Low	20°F
Highest Expected Low	25°F

This means that on a really cold year, the coldest it will get is 20°F. On most years you should be prepared to experience lows near 25°F.

Plants to Grow in Wasco

You may be interested in your other planting guides for Wasco.