One of the first steps you take when you are determining your gardening schedule is find your USDA Zone info. The zone info helps tell us things like average date of last frost and lowest expected temperature for your area.

By using the USDA zone info for Seminole you will be able to estimate when you can plant polygonums.

Planting Calendar for Polygonums

Frost tolerance for polygonums:	Not tolerant of frost.
When to plant:	After the last frost when the weather gets warmer.

It's probably a bad idea to plant polygonums until after the last frost because they are not cold tolerant.

The earliest that you can plant polygonums in Seminole is February. However, you really should wait until March if you don't want to take any chances.

The last month that you can plant polygonums and expect a good harvest is probably September. If you wait any later than that and your polygonums may not have a chance to fully mature. If you are starting your polygonums indoors then you might be able to get away with starting them a little bit earlier.

Last Frost Date

The average date of last frost is January 31 in Seminole. You should expect an average low temperature of 30°F in the coldest months of winter.

Just be sure to remember that USDA zone info for Seminole is an average and the actual date of last frost will vary from year to year. Half of the time in Seminole last frost occurs after January 31 so just be sure to be ready to cover your polygonums if you have a surprise late frost.

USDA Zone Info for Seminole

Here is the info for USDA Zone 10a.

Average Date of Last Frost (spring)	January 31
Average Date of First Frost (fall)	December 15
Lowest Expected Low	30°F
Highest Expected Low	35°F

This means that on a really cold year, the coldest it will get is 30°F. On most years you should be prepared to experience lows near 35°F.

Plants to Grow in Seminole

You may be interested in your other planting guides for Seminole.