Before planting it is a good idea to find your USDA Zone info to estimate your garden schedule. The zone info helps tell us things like average date of last frost and lowest expected temperature for your area.

By reviewing the USDA zone info for Tarpon Springs it's possible to figure out when it's a good idea to plant polygonums.

Planting Calendar for Polygonums

Frost tolerance for polygonums:	Not tolerant of frost.
When to plant:	After the last frost has passed.

It's a bad idea to plant polygonums until after the last frost because they do not do well in cold weather.

The earliest that you can plant polygonums in Tarpon Springs is March. However, you really should wait until April if you don't want to take any chances.

The last month that you can plant polygonums and expect a good harvest is probably September. You probably don't want to wait any later than that or else your polygonums may not have a chance to fully mature. If you are starting your polygonums indoors then you might be able to get away with starting them a couple of weeks earlier.

Last Frost Date

The average date of last frost is February 15 in Tarpon Springs. It might get as low as 25°F during the coldest months of winter.

Since the USDA zone info for Tarpon Springs is not always accurate the actual date of last frost is different every year. Since half of the time in Tarpon Springs last frost occurs after February 15 be ready to protect your polygonums if you have a surprise late frost.

USDA Zone Info for Tarpon Springs

Here is the info for USDA Zone 9b.

Average Date of Last Frost (spring)	February 15
Average Date of First Frost (fall)	December 15
Lowest Expected Low	25°F
Highest Expected Low	30°F

This means that on a really cold year, the coldest it will get is 25°F. On most years you should be prepared to experience lows near 30°F.

Plants to Grow in Tarpon Springs

You may be interested in your other planting guides for Tarpon Springs.