One of the first steps you take when you are figuring out your gardening schedule is find your USDA Zone info. The zone info helps tell us things like average date of last frost and lowest expected temperature for your area.

The USDA zone info for Bunkie can be used to figure out when you can plant platycodon.

Planting Calendar for Platycodon

Frost tolerance for platycodon:	Tolerant of a very small amount of frost.
When to plant:	Up to 3 weeks before last frost.

You can plant platycodon a bit earlier in the year because they are barely cold tolerant.

The earliest that you can plant platycodon in Bunkie is February. However, you really should wait until March if you don't want to take any chances.

The last month that you can plant platycodon and expect a good harvest is probably September. Any later than that and your platycodon may not have a chance to grow to maturity. If you are starting your platycodon indoors then you might be able to get away with starting them a little bit earlier.

Last Frost Date

The average date of last frost is February 15 in Bunkie. In the coldest months of winter you should expect an average low temperature of 20°F.

Keep in mind that the actual date of last frost is an average because it is based on the USDA zone info for Bunkie and it will vary from year to year. Half of the time in Bunkie last frost occurs after February 15 so make sure that you are ready to cover your platycodon in the event of a late frost.

USDA Zone Info for Bunkie

Here is the info for USDA Zone 9a.

Average Date of Last Frost (spring)	February 15
Average Date of First Frost (fall)	December 15
Lowest Expected Low	20°F
Highest Expected Low	25°F

This means that on a really cold year, the coldest it will get is 20°F. On most years you should be prepared to experience lows near 25°F.

Plants to Grow in Bunkie

You may be interested in your other planting guides for Bunkie.