The USDA Zone info is a great tool for gardeners to help us determine your gardening schedule. The zone info helps tell us things like average date of last frost and lowest expected temperature for your area.

It's possible to determine when it's a good idea to plant creeping zinnia by checking out the USDA zone info for Atwater.

Planting Calendar for Creeping Zinnia

Frost tolerance for creeping zinnia:	Tolerant of a very small amount of frost.
When to plant:	Up to 3 weeks before last frost.

Since creeping zinnia do ok in moderate cold you can plant them just a tiny bit earlier in the year than more sensitive plants.

The earliest that you can plant creeping zinnia in Atwater is February. However, you really should wait until March if you don't want to take any chances.

The last month that you can plant creeping zinnia and expect a good harvest is probably September. Any later than that and your creeping zinnia may not have a chance to fully mature. If you are starting your creeping zinnia indoors then you might be able to get away with starting them a little bit earlier.

Last Frost Date

The average date of last frost is February 15 in Atwater. In the coldest months of winter you can expect an average low temperature of 20°F.

Since the USDA zone info for Atwater is just an average the actual date of last frost is different every year. Half of the time in Atwater last frost occurs after February 15 so be sure to be ready to protect your creeping zinnia if you have a late frost.

USDA Zone Info for Atwater

Here is the info for USDA Zone 9a.

Average Date of Last Frost (spring)	February 15
Average Date of First Frost (fall)	December 15
Lowest Expected Low	20°F
Highest Expected Low	25°F

This means that on a really cold year, the coldest it will get is 20°F. On most years you should be prepared to experience lows near 25°F.

Plants to Grow in Atwater

You may be interested in your other planting guides for Atwater.