One of the first steps you take when you are estimating your gardening schedule is find your USDA Zone info. The zone info helps tell us things like average date of last frost and lowest expected temperature for your area.

The USDA zone info for Atwater can be reffered to in order to estimate when to plant platycodon.

Planting Calendar for Platycodon

Frost tolerance for platycodon:	Tolerant of a very small amount of frost.
When to plant:	Up to 3 weeks before last frost.

Platycodon do ok in moderate cold which tells us that you can plant them slightly earlier than plants that are more sensitive to the cold.

The earliest that you can plant platycodon in Atwater is February. However, you really should wait until March if you don't want to take any chances.

The last month that you can plant platycodon and expect a good harvest is probably September. Any later than that and your platycodon may not have a chance to grow to maturity. If you are starting your platycodon indoors then you might be able to get away with starting them a little bit earlier.

Last Frost Date

The average date of last frost is February 15 in Atwater. It might get as low as 20°F during the coldest months of winter.

Keep in mind that the actual date of last frost may not be accurate from year to year because it is based on the USDA zone info for Atwater and it can change quite a bit from year to year. Since half of the time in Atwater you get a frost after February 15 be ready to cover your platycodon in the event of a surprise late frost.

USDA Zone Info for Atwater

Here is the info for USDA Zone 9a.

Average Date of Last Frost (spring)	February 15
Average Date of First Frost (fall)	December 15
Lowest Expected Low	20°F
Highest Expected Low	25°F

This means that on a really cold year, the coldest it will get is 20°F. On most years you should be prepared to experience lows near 25°F.

Plants to Grow in Atwater

You may be interested in your other planting guides for Atwater.