One of the first steps you take when you are determining your gardening schedule is find your USDA Zone info. The zone info helps tell us things like average date of last frost and lowest expected temperature for your area.

The first chance to plant endive in Riverbank can be figured out by referring to the USDA zone info.

Planting Calendar for Endive

Frost tolerance for endive:	Tolerant of some frost.
When to plant:	Up to 5 weeks before last frost.

Endive do well in moderate cold which means that you can start planting them earlier than more sensitive plants.

The earliest that you can plant endive in Riverbank is January. However, you really should wait until February if you don't want to take any chances.

The last month that you can plant endive and expect a good harvest is probably October. If you wait any later than that and your endive may not have a chance to fully mature. If you are starting your endive indoors then you might be able to get away with starting them a little bit earlier.

Last Frost Date

In Riverbank the average date of last frost happens on February 15. It might get as low as 25°F during the coldest months of winter.

Remember that the actual date of last frost is not always accurate because it is based on the USDA zone info for Riverbank and it is different every year. Since half of the time in Riverbank there is a last frost after February 15 be ready to cover your endive if you have a surprise late frost.

USDA Zone Info for Riverbank

Here is the info for USDA Zone 9b.

Average Date of Last Frost (spring)	February 15
Average Date of First Frost (fall)	December 15
Lowest Expected Low	25°F
Highest Expected Low	30°F

This means that on a really cold year, the coldest it will get is 25°F. On most years you should be prepared to experience lows near 30°F.

Plants to Grow in Riverbank

You may be interested in your other planting guides for Riverbank.