The USDA Zone info is a great tool for gardeners to help us figure out your gardening schedule. The most important data that the zone info tells us is average last frost and the lowest expected temperature for your area.

The earliest that you can plant platycodon in Riverbank can be estimated by looking at the USDA zone info.

Planting Calendar for Platycodon

Frost tolerance for platycodon:	Tolerant of a very small amount of frost.
When to plant:	Up to 3 weeks before last frost.

Since platycodon are barely cold tolerant you can plant them just a tiny bit earlier in the year than other plants that might not handle the cold.

The earliest that you can plant platycodon in Riverbank is February. However, you really should wait until March if you don't want to take any chances.

The last month that you can plant platycodon and expect a good harvest is probably September. If you wait any later than that and your platycodon may not have a chance to fully mature. If you are starting your platycodon indoors then you might be able to get away with starting them a few weeks earlier.

Last Frost Date

The average date of last frost is February 15 in Riverbank. It might get as low as 25°F during the coldest months of winter.

Always keep in mind that the actual date of last frost is an average because it is based on the USDA zone info for Riverbank and it can change quite a bit from year to year. Since half of the time in Riverbank you get a frost after February 15 be ready to cover your platycodon in the event of a surprise late frost.

USDA Zone Info for Riverbank

Here is the info for USDA Zone 9b.

Average Date of Last Frost (spring)	February 15
Average Date of First Frost (fall)	December 15
Lowest Expected Low	25°F
Highest Expected Low	30°F

This means that on a really cold year, the coldest it will get is 25°F. On most years you should be prepared to experience lows near 30°F.

Plants to Grow in Riverbank

You may be interested in your other planting guides for Riverbank.